SSID´s en APRS

Imagen de ea1axy
Radio: 

Breve o no tan breve recopilatorio de los SSID´s usados en el tiempo que llevo en APRS.
-> SSID -0 (no SSID) should be used for all fixed stations (home-qth)
-> SSID -1 should be used for all sorts of gateways (IGATE, Sat-Gate,
HF-Gate and so on)
-> SSID -2 should be used for APRS-WIDE-Digipeater (which are all
digipeaters with aliases of (RELAY, WIDE and TRACE)
-> SSID -3 should be used for APRS-RELAY-digipeaters (aliases of RELAY
only)
-> SSID -4 unassigned
-> SSID -5 should be used for WX stations
-> SSID -6 unassigned
-> SSID -7 should be used for special mobile stations (truck, bicycle,
motorbike, Jeep, bus, RCV ect., NOT for normal cars)
-> SSID -8 should be used for fixed, portable stations
-> SSID -9 should be used for normal cars
-> SSID -10 should be used for Sat-stations (using APRS via satellite)
-> SSID -11 should be used for TCPIP stations
-> SSID -12 unassigned
-> SSID -13 unassigned
-> SSID -14 unassigned
-> SSID -15 unassigned
0 Fijas o IGates
1 Digipeater Digi Relay Digi Meteo
2 Digi 70 cm
3 Digi general
4 Gateway V-Hf
5 Igate
6 Sat
7 K THD7
8 MMaritima o WIFI
9 Moviles
10 Internet
11 Tonos Y G Aereos
12 Portables
13
14 Camiones
15 HF
0 No icon
1 ambulancia
2 Autobus
3 Camion Bomberos
4 Bicicleta
5 Yate
6 Helicoptero
7 Avion pequeño
8 Motora
9 Coche
10 Motocicleta
11 Globo Aeroestatico
12 TodoTerreno
13 Vehiculo de recreo
14 Camion
15 Furgoneta
LAST
Use of Symbols and SSID
Choice of proper symbol is required to easily identify individual installations on an APRS map (remember to use an updated version of the symbol table). Use of “correct” symbols is a must, especially when using APRS as part of ARES (Amateur Radio Emergency Services), as this will immediately display the station’s function on available maps in the HQ (operations rooms, etc). This document is therefore also a recommendation on using correct symbols, for proper map displays.
Use of SSID
Although in the early 1990’s there were some specific SSID definitions for raw NMEA GPS data, those SSID’s are no long needed. However, the APRS community has found it useful to encourage users to consider a few simple SSID’s as it makes rapid callsign recognition possible. The most commonly used are:
SSID Function
-6 Satellite or special applications
-7 TH-D7 or other handheld applications
-8 Boats (Maritime Mobile)
-9 Stations primarily mobile
-10 Internet only applications
-11 Balloons
-14 Large multi-wheel trucks
Remarks:
- SSID -1 to -4 are normally used when having more ports/frequencies on the same Digipeater or home callsign.
- A standalone Digipeater does not require a SSID, as the assigned callsign would normally clearly indicate what kind of installation we are talking about
------------------------------------------------------------------------------------------------------------------------
Last Last
Bob Bruninga, WB4APR, the inventor and ultimate authority on APRS, released an updated set of recommendations on 9 June this year to provide more flexibility for current usage.
The new recommendations are:
-0 Your primary station, usually fixed and message capable.
-1 Additional station, digi, mobile, weather station etc.
-2 Additional station, digi, mobile, weather station etc.
-3 Additional station, digi, mobile, weather station etc.
-4 Additional station, digi, mobile, weather station etc.
-5 Network sources (smartphones etc.)
-6 Special activity, e.g. satellite operations, camping, 50MHz etc.
-7 Handheld radios and other human portables.
-8 Boats, RVs or second mobile.
-9 Primary mobile.
-10 Internet gateways, Echolink, Winlink, AVRS, APRN, etc.
-11 Balloons, aircraft, spacecraft, etc.
-12 APRStt, DTMF, RFID devices, trackers etc.
-13 Weather stations.
-14 Truckers or other full time drivers.
-15 Additional station, digi, mobile, weather station etc.
Y como siempre una reflexión ... copiada de algún post anterior y rectificada a los nuevos tiempos.
ICONOS y SSIDs:
Cada estación debe usar el símbolo o ICONO adecuado a su instalación, con el que aparecerá en el mapa de APRS, para una mejor interpretación de las demás estaciones que lo están visionando.
A esa rápida interpretación también contribuye un buen uso del SSID siguiendo la anterior tabla idenfiticativa con carácter general.
Los SSIDs del -0 al -4 son usados normalmente por instalaciones fijas (Digipeater o QTH fijos) donde se usan más de un puerto o frecuencias. Para los QTH fijos de estaciones individuales que solo usen un puerto NO es necesario usar SSID.
Un Digipeater desatendido tampoco requiere SSID, ya que el indicativo asignado normalmente ya indica claramente qué clase de estación es.
A la par de esto NO confundir ICONO con SSID, perfectamente una estación WX NO tiene por qué tener un SSID ( Identificador Secundario de Estación ) por ejemplo. ¡ Esto era hasta ahora claro, la mía ya está con la nueva recomendación. EA1AXY-13 ¡
Pero si a una estación fija le conectas un GPS, algún programa la identificará como movil, caso del UI-View. De lo que movil sí SSID, WX NO sería necesario. ¡ Mismo anterior. ¡
Tampoco sería de "recibo", la fija, la meteo, la del gps, la del igate, la de .... y TODAS desde el mismo sitio ... que ya te vemos y sabemos, o no, quién eres y dónde estás.
Saludos y buén provecho.
Más información sobre la actualización del uso de los SSID´s en APRS. como no ..
http://aprs.org/aprs11/SSIDs.txt

Añadir nuevo comentario